YEN LE COMPANY LIMITED

Cable tray system and electrical enclosures

Tax code: 3700 919 919 - Address: 16th Floor Becamex Tower, No. 230 Binh Duong Avenue, Binh Duong Province, Vietnam

Cable tray - Cable ladder - Trunking - Cable duct - Perforated cable tray

Powder coating, hot dipped galvanized, pre-galvanized, stainless steel trunking

Cable trunking

A trunking system is used to support insulated electric cables used for power distribution and communication. This system is suitable for workshops, buildings …

The trunking systems are commonly used for cable management in commercial and industrial construction.

The trunking systems are especially useful in situations where changes in a wiring system are anticipated since new cables can be installed by laying them in the trunking, instead of pulling them through a pipe.

The trunking systems provide the maximum protection to cables, but requires cutting the trunking or using fittings to enter or exit cables.

Common trunking is made of galvanized steel, stainless steel, steel finished with powder coating. The material for a given application is chosen based on where it will be used. Galvanized trunking may be made of pre-galvanized steel sheet fabricated into the trunking, or may be hot-dip galvanized after fabrication. When galvanized trunking is cut to length in the field, usually the cut surface will be painted with a zinc-rich compound to protect the metal from corrosion.

Dimensions:

  • Width: 50 ÷ 600mm
  • Height: 40 ÷ 200mm
  • Length unit: 2440mm, 2500mm hoặc 3000mm
  • Thickness: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm và 2.5mm
  • Common color: White, beige, grey, orange or original material color. Other colors are available upon request.

Common cable trunking sizes are listed as below. The other sizes are available upon request

Item Code Hieght H (mm) Width W (mm) Thickness T (mm)
Trunking 40x60 MC40x60 40 60 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x50 MC50x50 50 50 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x75 MC50x75 50 75 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x100 MC50x100 50 100 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x150 MC50x150 50 150 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x200 MC50x200 50 200 0.8 - 1.0 - 1.2 - 1.5
Trunking 50x250 MC50x250 50 250 1.0 - 1.2 - 1.5 - 2.0
Trunking 50x300 MC50x300 50 300 1.0 - 1.2 - 1.5 - 2.0
Trunking 75x100 MC75x100 75 100 0.8 - 1.0 - 1.2 - 1.5
Trunking 75x150 MC75x150 75 150 0.8 - 1.0 - 1.2 - 1.5
Trunking 75x200 MC75x200 75 200 1.0 - 1.2 - 1.5 - 2.0
Trunking 75x250 MC75x250 75 250 1.2 - 1.5 - 2.0
Trunking 75x300 MC75x300 75 300 1.2 - 1.5 - 2.0
Trunking 75x400 MC75x400 75 400 1.2 - 1.5 - 2.0
Trunking 100x100 MC100x100 100 100 1.0 - 1.2 - 1.5 - 2.0
Trunking 100x150 MC100x150 100 150 1.2 - 1.5 - 2.0
Trunking 100x200 MC100x200 100 200 1.2 - 1.5 - 2.0
Trunking 100x250 MC100x250 100 250 1.2 - 1.5 - 2.0
Trunking 100x300 MC100x300 100 300 1.2 - 1.5 - 2.0
Trunking 100x400 MC100x400 100 400 1.5 - 2.0
Trunking 100x500 MC100x500 100 500 1.5 - 2.0
Trunking 150x150 MC150x150 150 150 1.2 - 1.5 - 2.0
Trunking 150x200 MC150x200 150 200 1.2 - 1.5 - 2.0
Trunking 150x300 MC150x300 150 300 1.2 - 1.5 - 2.0
Trunking 150x400 MC150x400 150 400 1.5 - 2.0
Trunking 150x500 MC150x500 150 500 1.5 - 2.0
Trunking 150x600 MC150x600 150 600 2.0
Trunking 200x400 MC200x400 200 400 2.0
Trunking 200x500 MC200x500 200 500 2.0
Trunking 200x600 MC200x600 200 600 2.0
Connector hole type
Connector hole type 1 (default)
Connector hole type 1
Connector hole type 2 (on request)
Connector hole type 2
Connector hole type 2 (on request)
Connector hole type 3
Trunking horizontal 900 bend / elbow
Trunking horizontal 900 bend / elbow is used to redirect the trunking system to 900 on the same plane.
Horizontal 90<sup>0</sup> bend / elbow
Trunking horizontal 900 bend / elbow cover
Trunking horizontal 90<sup>0</sup> bend / elbow Cover
Trunking horizontal 300, 450, 600 bend / elbow
Trunking horizontal 300, 450, 600 bend / elbow is used to redirect the trunking system to 300, 450, 600 on the same plane.
Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow
Trunking horizontal 300, 450, 600 bend / elbow cover
Trunking Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow Cover
Trunking horizontal tee
Trunking horizontal tee is used to divide the trunking system into three ways on the same plane
Horizontal tee
Trunking horizontal tee cover
Trunking horizontal tee cover
Trunking horizontal cross
Trunking horizontal cross is used to divide the trunking system into four ways on the same plane
Horizontal cross
Trunking horizontal cross cover
Trunking horizontal cross cover
Trunking vertical inside riser / bend / elbow
Trunking vertical inside riser / bend / elbow is used to redirect the trunking system to upward perpendicular trend from the base plane.
Trunking Vertical inside riser / bend / elbow
Trunking vertical inside riser / bend / elbow cover
Trunking Vertical inside riser / bend / elbow cover
Trunking vertical outside riser / bend / elbow
Trunking vertical outside riser / bend / elbow is used to redirect the trunking system to downward perpendicular trend from the base plane.
trunking Vertical outside riser / bend / elbow
Trunking vertical outside riser / bend / elbow cover
Trunking Vertical outside riser / bend / elbow cover
Trunking horizontal reducer
Trunking horizontal reducer is used to reduce the trunking system width. There are three type of reducer:
Trunking straight reducer
trunking Straight reducer
Trunking straight reducer cover
trunking Straight reducer cover
Trunking left reducer
trunking Left reducer
Trunking left reducer cover
Trunking Left reducer cover
Trunking right reducer
Trunking Right reducer
Trunking right reducer cover
Trunking Right reducer cover
Trunking horizontal WYE
There are two type of trunking WYE:
Trunking left WYE
Trunking Left WYE
Trunking left WYE cover
Trunking Left WYE cover
Trunking right WYE
Trunking Right WYE
Trunking right WYE cover
Trunking Right WYE cover

Powder coating, hot dipped galvanized, pre-galvanized, stainless steel cable tray

Perforated cable tray

A cable tray system is used to support insulated electric cables used for power distribution and communication. This system is suitable for workshops, buildings …

The cable tray systems are commonly used for cable management in commercial and industrial construction.

The cable tray system are especially useful in situations where changes in a wiring system are anticipated since new cables can be installed by laying them in the tray, instead of pulling them through a pipe.

Common cable tray is made of galvanized steel, stainless steel, steel finished with powder coating. The material for a given application is chosen based on where it will be used. Galvanized cable may be made of pre-galvanized steel sheet fabricated into the cable tray, or may be hot-dip galvanized after fabrication. When galvanized tray is cut to length in the field, usually the cut surface will be painted with a zinc-rich compound to protect the metal from corrosion.

Dimensions:

  • Width: 75 ÷ 800mm
  • Height: 50 ÷ 200mm
  • Length: 2440mm, 2500mm hoặc 3000mm
  • Thickness: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm và 2.5mm
  • Common color: White, beige, grey, orange or original material color. Other colors are available upon request.

Common cable tray sizes are listed as below. The other sizes are available upon request

Item Code Hieght H (mm) Width W (mm) Thickness T (mm)
Cable tray 50x75 KC50x75 50 75 0.8 - 1.0 - 1.2 - 1.5
Cable tray 50x100 KC50x100 50 100 0.8 - 1.0 - 1.2 - 1.5
Cable tray 50x150 KC50x150 50 150 0.8 - 1.0 - 1.2 - 1.5
Cable tray 50x200 KC50x200 50 200 0.8 - 1.0 - 1.2 - 1.5
Cable tray 50x250 KC50x250 50 250 1.0 - 1.2 - 1.5 - 2.0
Cable tray 50x300 KC50x300 50 300 1.0 - 1.2 - 1.5 - 2.0
Cable tray 75x100 KC75x100 75 100 0.8 - 1.0 - 1.2 - 1.5
Cable tray 75x150 KC75x150 75 150 0.8 - 1.0 - 1.2 - 1.5
Cable tray 75x200 KC75x200 75 200 1.0 - 1.2 - 1.5 - 2.0
Cable tray 75x250 KC75x250 75 250 1.2 - 1.5 - 2.0
Cable tray 75x300 KC75x300 75 300 1.2 - 1.5 - 2.0
Cable tray 75x400 KC75x400 75 400 1.2 - 1.5 - 2.0
Cable tray 100x100 KC100x100 100 100 1.0 - 1.2 - 1.5 - 2.0
Cable tray 100x150 KC100x150 100 150 1.2 - 1.5 - 2.0
Cable tray 100x200 KC100x200 100 200 1.2 - 1.5 - 2.0
Cable tray 100x250 KC100x250 100 250 1.2 - 1.5 - 2.0
Cable tray 100x300 KC100x300 100 300 1.2 - 1.5 - 2.0
Cable tray 100x400 KC100x400 100 400 1.5 - 2.0
Cable tray 100x500 KC100x500 100 500 1.5 - 2.0
Cable tray 100x600 KC100x600 100 600 2.0
Cable tray 150x150 KC150x150 150 150 1.2 - 1.5 - 2.0
Cable tray 150x200 KC150x200 150 200 1.2 - 1.5 - 2.0
Cable tray 150x300 KC150x300 150 300 1.2 - 1.5 - 2.0
Cable tray 150x400 KC150x400 150 400 1.5 - 2.0
Cable tray 150x500 KC150x500 150 500 1.5 - 2.0
Cable tray 150x600 KC150x600 150 600 2.0
Cable tray 150x800 KC150x800 150 800 2.0
Cable tray 200x400 KC200x400 200 400 2.0
Cable tray 200x500 KC200x500 200 500 2.0
Cable tray 200x600 KC200x600 200 600 2.0
Cable tray 200x800 KC200x800 200 800 2.0
Connector hole type
Connector hole type 1 (default)
Connector hole type 1
Connector hole type 2 (on request)
Connector hole type 2
Connector hole type 3 (on request)
Connector hole type 3
Cable tray horizontal 900 bend / elbow
Cable tray horizontal 900 bend / elbow is used to redirect the Cable tray system to 900 on the same plane.
Horizontal 90<sup>0</sup> bend / elbow
Cable tray horizontal 900 bend / elbow cover
Cable tray horizontal 90<sup>0</sup> bend / elbow Cover
Cable tray horizontal 300, 450, 600 bend / elbow
Cable tray horizontal 300, 450, 600 bend / elbow is used to redirect the Cable tray system to 300, 450, 600 on the same plane.
Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow
Cable tray horizontal 300, 450, 600 bend / elbow cover
Cable tray Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow Cover
Cable tray horizontal tee
Cable tray horizontal tee is used to divide the Cable tray system into three ways on the same plane
Horizontal tee
Cable tray horizontal tee cover
Cable tray horizontal tee cover
Cable tray horizontal cross
Cable tray horizontal cross is used to divide the Cable tray system into four ways on the same plane
Horizontal cross
Cable tray horizontal cross cover
Cable tray horizontal cross cover
Cable tray vertical inside riser / bend / elbow
Cable tray vertical inside riser / bend / elbow is used to redirect the Cable tray system to upward perpendicular trend from the base plane.
Cable tray Vertical inside riser / bend / elbow
Cable tray vertical inside riser / bend / elbow cover
Cable tray Vertical inside riser / bend / elbow cover
Cable tray vertical outside riser / bend / elbow
Cable tray vertical outside riser / bend / elbow is used to redirect the Cable tray system to downward perpendicular trend from the base plane.
Cable tray Vertical outside riser / bend / elbow
Cable tray vertical outside riser / bend / elbow cover
Cable tray Vertical outside riser / bend / elbow cover
Cable tray horizontal reducer
Cable tray horizontal reducer is used to reduce the Cable tray system width. There are three type of reducer:
Cable tray straight reducer
Cable tray Straight reducer
Cable tray straight reducer cover
Cable tray Straight reducer cover
Cable tray left reducer
Cable tray Left reducer
Cable tray left reducer cover
Cable tray Left reducer cover
Cable tray right reducer
Cable tray Right reducer
Cable tray right reducer cover
Cable tray Right reducer cover
Cable tray horizontal WYE
There are two type of Cable tray WYE:
Cable tray left WYE
Cable tray Left WYE
Cable tray left WYE cover
Cable tray Left WYE cover
Cable tray right WYE
Cable tray Right WYE
Cable tray right WYE cover
Cable tray Right WYE cover

Powder coating, hot dipped galvanized, pre-galvanized, stainless steel cable ladder

Cable ladder inside rail type (default) Cable ladder
Cable ladder outside rail type (on request) Cable ladder outside rail type

A cable ladder system is used to support insulated electric cables used for power distribution and communication. This system is suitable for workshops, buildings …

The cable ladder systems are commonly used for cable management in commercial and industrial construction.

The cable ladder systems are especially useful in situations where changes in a wiring system are anticipated since new cables can be installed by laying them in the ladder, instead of pulling them through a pipe.

Common cable ladder is made of galvanized steel, stainless steel, steel finished with powder coating. The material for a given application is chosen based on where it will be used. Galvanized cable ladder may be made of pre-galvanized steel sheet fabricated into the ladder, or may be hot-dip galvanized after fabrication. When galvanized ladder is cut to length in the field, usually the cut surface will be painted with a zinc-rich compound to protect the metal from corrosion.

Dimensions:

  • Width: 100 ÷ 1000mm
  • Height: 50 ÷ 200mm
  • Length: 2440mm, 2500mm hoặc 3000mm
  • Thickness: 1.0mm, 1.2mm, 1.5mm, 2.0mm và 2.5mm
  • Common color: White, beige, grey, orange or original material color. Other colors are available upon request.

Common cable ladder sizes are listed as below. The other sizes are available upon request

Item Code Hieght H (mm) Width W (mm) Thickness T (mm)
Cable ladder 50x100 TC50x100 50 100 1.0 - 1.2 - 1.5
Cable ladder 50x150 TC50x150 50 150 1.0 - 1.2 - 1.5
Cable ladder 50x200 TC50x200 50 200 1.0 - 1.2 - 1.5
Cable ladder 75x100 TC75x100 75 100 1.0 - 1.2 - 1.5
Cable ladder 75x150 TC75x150 75 150 1.0 - 1.2 - 1.5
Cable ladder 75x200 TC75x200 75 200 1.2 - 1.5 - 2.0
Cable ladder 75x300 TC75x300 75 300 1.2 - 1.5 - 2.0
Cable ladder 75x400 TC75x400 75 400 1.2 - 1.5 - 2.0
Cable ladder 100x100 TC100x100 100 100 1.2 - 1.5 - 2.0
Cable ladder 100x150 TC100x150 100 150 1.2 - 1.5 - 2.0
Cable ladder 100x200 TC100x200 100 200 1.2 - 1.5 - 2.0
Cable ladder 100x250 TC100x250 100 250 1.2 - 1.5 - 2.0
Cable ladder 100x300 TC100x300 100 300 1.2 - 1.5 - 2.0
Cable ladder 100x400 TC100x400 100 400 1.5 - 2.0
Cable ladder 100x500 TC100x500 100 500 1.5 - 2.0
Cable ladder 100x600 TC100x600 100 600 2.0
Cable ladder 150x150 TC150x150 150 150 1.2 - 1.5 - 2.0
Cable ladder 150x200 TC150x200 150 200 1.2 - 1.5 - 2.0
Cable ladder 150x300 TC150x300 150 300 1.2 - 1.5 - 2.0
Cable ladder 150x400 TC150x400 150 400 1.5 - 2.0
Cable ladder 150x500 TC150x500 150 500 1.5 - 2.0
Cable ladder 150x600 TC150x600 150 600 2.0
Cable ladder 150x800 TC150x800 150 800 2.0
Cable ladder 200x400 TC200x400 200 400 2.0
Cable ladder 200x500 TC200x500 200 500 2.0
Cable ladder 200x600 TC200x600 200 600 2.0
Cable ladder 200x800 TC200x800 200 800 2.0
Connector hole type
Connector hole type 1 (default)
Connector hole type 1 Connector hole type 1
Connector hole type 2 (on request)
Connector hole type 2 Connector hole type 2
Connector hole type 3 (on request)
Connector hole type 3 Connector hole type 3
Cable ladder horizontal 900 bend / elbow
Cable ladder horizontal 900 bend / elbow is used to redirect the Cable ladder system to 900 on the same plane.
Horizontal 90<sup>0</sup> bend / elbow
Cable ladder horizontal 900 bend / elbow outside rail type
Cable ladder horizontal 90<sup>0</sup> bend / elbow outside rail type
Cable ladder horizontal 300, 450, 600 bend / elbow
Cable ladder horizontal 300, 450, 600 bend / elbow is used to redirect the Cable ladder system to 300, 450, 600 on the same plane.
Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow
Cable ladder horizontal 300, 450, 600 bend / elbow outside rail type
Cable ladder Horizontal 30<sup>0</sup>, 45<sup>0</sup>, 60<sup>0</sup> bend / elbow outside rail type
Cable ladder horizontal tee
Cable ladder horizontal tee is used to divide the Cable ladder system into three ways on the same plane
Horizontal tee
Cable ladder horizontal tee outside rail type
Cable ladder horizontal tee outside rail type
Cable ladder horizontal cross
Cable ladder horizontal cross is used to divide the Cable ladder system into four ways on the same plane
Horizontal cross
Cable ladder horizontal cross outside rail type
Cable ladder horizontal cross outside rail type
Cable ladder vertical inside riser / bend / elbow
Cable ladder vertical inside riser / bend / elbow is used to redirect the Cable ladder system to upward perpendicular trend from the base plane.
Cable ladder Vertical inside riser / bend / elbow
Cable ladder vertical inside riser / bend / elbow outside rail type
Cable ladder Vertical inside riser / bend / elbow outside rail type
Cable ladder vertical outside riser / bend / elbow
Cable ladder vertical outside riser / bend / elbow is used to redirect the Cable ladder system to downward perpendicular trend from the base plane.
Cable ladder Vertical outside riser / bend / elbow
Cable ladder vertical outside riser / bend / elbow outside rail type
Cable ladder Vertical outside riser / bend / elbow outside rail type
Cable ladder horizontal reducer
Cable ladder horizontal reducer is used to reduce the Cable ladder system width. There are three type of reducer:
Cable ladder straight reducer
Cable ladder Straight reducer
Cable ladder straight reducer outside rail type
Cable ladder Straight reducer outside rail type
Cable ladder left reducer
Cable ladder Left reducer
Cable ladder left reducer outside rail type
Cable ladder Left reducer outside rail type
Cable ladder right reducer
Cable ladder Right reducer
Cable ladder right reducer outside rail type
Cable ladder Right reducer outside rail type
Cable ladder vertical tee
Cable ladder vertical tee inside rail type (default)
Cable ladder vertical tee
Cable ladder vertical tee outside rail type (on request)
Cable ladder vertical tee outside rail type
Product list
Social network
Review
Cable trunking
Rated: 4.8 / 5 based on 179 customer reviews
Price: 2.7 USD
Product description: Powder coating, pre-galvanized, hot dipped galvanized cable trunking Powder coating, pre-galvanized, hot dipped galvanized cable trunking
Cable ladder
Rated: 4.9 / 5 based on 138 customer reviews
Price: 3.2 USD
Product description: Powder coating, pre-galvanized, hot dipped galvanized cable ladder Powder coating, pre-galvanized, hot dipped galvanized cable ladder
Cable tray
Rated: 4.5 / 5 based on 256 customer reviews
Price: 2.9 USD
Product description: Powder coating, pre-galvanized, hot dipped galvanized cable tray Powder coating, pre-galvanized, hot dipped galvanized cable tray
Wire mesh cable tray
Rated: 4.8 / 5 based on 68 customer reviews
Price: 2 USD
Product description: Mesh cable tray, wire mesh cable tray Mesh cable tray, wire mesh cable tray
Electrical enclosures
Rated: 4.5 / 5 based on 86 customer reviews
Price: 7.5 USD
Product description: Powder coating, stainless steel enclosure Powder coating, stainless steel enclosure
Wall mounted enclosure
Rated: 4.2 / 5 based on 218 customer reviews
Price: 7.3 USD
Product description: Wall mounted enclosure, water resistant enclosure water resistant enclosure
Stainless steel enclosures
Rated: 4.0 / 5 based on 79 customer reviews
Price: 72 USD
Product description: Stainless steel enclosures stainless steel enclosures

Images

  • Máng cáp đột lỗ
    Máng cáp sơn tĩnh điện
    Thang cáp mạ kẽm nhúng nóng
    Thang cáp sơn tĩnh điện
    Máng cáp dạng lưới, wire mesh cable tray
    Lắp ráp tủ điện
  • tủ điện
    Bán thành phẩm
    Bộ điều khiển máy đột CNC
    Bộ điều khiển máy chấn CNC
    Máy chấn CNC
    Máy đột dập CNC
  • Máy đột dập
    Máy mài từ
    Tủ trạm
    Xưởng sản xuất
    Tủ có chân
    Tủ mái che, tủ ngoài trời